350vip浦京集团(中国)股份有限公司

服务热线电话

400-6188-756

超声波清洗机有哪几种温控方式?

来源:/ 时间: 2024-05-28 浏览次数: 0

  1、数控面板加热

1. CNC panel heating

  一般实验室使用的数控超声波清洗机,带加热功能的机型,为数控按钮加热。数控区显示当前温度,可设置温度值。当达到加热值时,自动停止加热。这种加热一般用硅胶板加热。

The CNC ultrasonic cleaning machine commonly used in laboratories, with a heating function model, is equipped with a CNC button for heating. The CNC area displays the current temperature, and the temperature value can be set. When the heating value is reached, the heating automatically stops. This type of heating is usually done using a silicone plate.

  2、机械温度控制

2. Mechanical temperature control

  普通超声波清洗机一般采用机械控温,即旋钮调节温度。

Ordinary ultrasonic cleaning machines generally use mechanical temperature control, which means adjusting the temperature with a knob.

  3、温控器加热

3. Temperature controller heating

  分体式超声波清洗机可根据使用情况通过温控器进行加热。

The split type ultrasonic cleaning machine can be heated through a temperature controller according to the usage situation.

20230310030002192.png

  使用方法如下:按下加热开关,温控器将显示测量温度和控制温度。上方显示的是测量温度,下方显示的是控制温度。当被测温度低于控制温度时,温控器上的out灯亮,加热指示灯亮,设备处于加热状态;当被测温度高于控制温度时,温度控制仪表上的out灯灭,加热指示灯灭,设备停止加热。

The usage method is as follows: Press the heating switch, and the temperature controller will display the measured temperature and the controlled temperature. The temperature measurement is displayed above, and the temperature control is displayed below. When the measured temperature is lower than the control temperature, the out light on the temperature controller lights up, the heating indicator light lights up, and the equipment is in a heating state; When the measured temperature is higher than the control temperature, the out light on the temperature control instrument goes out, the heating indicator light goes out, and the equipment stops heating.

  控制温度设置方法:按拨号键设置控制温度,控制温度为58度。这种类型一般采用加热管加热。

Temperature control setting method: Press the dial key to set the control temperature to 58 degrees. This type generally uses heating tubes for heating.

以上是有关:超声波清洗机 的介绍,想了解更多的内容请点击: 我们将会全心全意为您提供满分服务,欢迎您的来电!

The above is an introduction to ultrasonic cleaning machines. To learn more, please click: We will wholeheartedly provide you with full score service. Welcome to call us!

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:山东省济南市济阳区创业路与启航街交叉口南40米

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1  鲁公网安备37011202000628号